Automatic Dosing System in China - Reliable Suppliers & Factory for Polymer Preparation Units
Working Principle
The Automatic Dosing system Working Process:
The chemical dosing system Controlled by the electrical panel, the Powder Dosing system can run in Automatic or manual mode. In Automatic cycle, when the level of the solution is low, and the chemical dosing unit rotary sensor of the powder detect a full hopper, the water solenoid valve is activated and the powder feeding system starts, leading to pre-mixing in a cyclonic movement before entering the first mixing tank.
The flocculant dosing system tank is divided into three compartment: mixing tank, maturation tank, and service tank. Each one has its own mixing device, to assure total dissolution of the chemical powder.
The powder dosing system mixers are in continuous stirring action in order to assure the polymer dosing homogenous solution before delivery. The chemical dosing or polymer pumping system is easily connected to the chemical dosing unit, with special protection from dry run. The polymer dosing system provided continuous ready solution.
Automatic Dosing system can select PAM Based on demand.
It is safe, convenient, reliable and has a wide range of applications. It is especially suitable for papermaking industry, industrial wastewater treatment and municipal wastewater treatment plants, waterworks and Industries requiring the use of flocculant solution.
Features
Continuous Preparation
Continuous preparation of three tanks (mixing tank, equalizing tank and storage tank) is easy to operate and maintain with the lowest manpower cost.
Uniform Concentration
Uniform and moderate formulation concentration can reduce the occurrence of granulation (block) caused by improper manpower allocation, avoid pipeline or pump blockage, and increase unnecessary personnel maintenance costs and powder expenditure.
PLC Automated Control
The equipment is controlled by PLC in the whole preparation process. It can automatically intermittent, continuous operation and stop cross stirring function to make solution fusion uniform.
Applications
Prepared polymers are used to achieve coagulation and flocculation as a means to particle removal in both drinking water and waste water treatment.
Also, polymers are instrumental in efficient sludge dewatering applications.
Frequently Asked Questions
Q:How does the Automatic Dosing System control its operations?
The chemical dosing system is controlled by an electrical panel and can run in either automatic or manual mode depending on your process requirements.
Q:What is the tank configuration of the flocculant dosing system?
The system features a three-compartment tank design consisting of a mixing tank, a maturation tank, and a service tank. Each compartment is equipped with its own mixing device to ensure complete chemical dissolution.
Q:How does the system prevent polymer solution granulation?
The system uses continuous stirring action and uniform formulation concentration to prevent granulation (clumping) caused by improper manual mixing, effectively avoiding pipeline or pump blockages.
Q:Is the dosing system protected against running dry?
Yes, the chemical dosing and polymer pumping system is designed with special dry-run protection to safeguard the equipment during continuous operations.
Q:What industries are best suited for this automatic dosing system?
It is highly suitable for the papermaking industry, municipal and industrial wastewater treatment plants, waterworks, and any industry requiring efficient polymer/flocculant solution preparation.