Leave Your Message

Bio Cord Filter Media from Chinese Suppliers and Factory for Enhanced Ecological Treatment Solutions

The bio cord ecological treatment system effectively decomposes pollutants and waste gases generated from human activities by utilizing biological contact oxidation methods. As a leading factory in China, we specialize in natural ecological treatment solutions designed for environmental protection. Our innovative approach promotes the natural circulation of ecology, enhancing the processing capacity of existing biological treatment systems. By implementing our bio cord technology, suppliers can significantly reduce the overall environmental load, fostering a cleaner and more sustainable future

    Feature

    01

    A large number of microorganisms can be fixed to form an ideal environment where they coexist. High treatment effect can be achieved through one-level treatment, which has been proved in many river ecological restoration cases.

    02

    The radial structure is composed of numerous circular fibers, which can increase the surface area and adapt to the growth and reproduction of various microorganisms, so that the concentration of attached microorganisms can reach more than 150000mg / L, which is used in the treatment of high concentration ammonia nitrogen wastewater of a large electronic company.

    03

    On its surface, ammonia nitrogen can be reduced by the proliferation of aerobic microorganisms, and biological denitrification can be carried out by the proliferation of anaerobic microorganisms inside the biological lace.

    04

    The shape is rope shape, so the shape can be changed freely during setting. Biological lace is ring-shaped, which can avoid excessive peeling of biological film due to water impact.

    05

    Shaking in the wastewater can not only absorb the dissolved oxygen in the water, but also improve the contact efficiency with the water and the removal rate of organic matters.

    06

    Not only in the treatment of low concentration wastewater, but also in the high concentration reaction tank which is easy to be blocked by contact materials.

    07

    It can attach a large number of microorganisms, so it can also be used in a small-scale reaction tank.

    How to install

    The vertical and horizontal spacing of packing support is 100-200mm.

    The braided packing is fixed by PE / PP tie directly on the packing bracket. The braided packing does not need to be cut, but can be attached 100-200mm along the bracket and fixed again.

    There are two ways for the biological rope to be set in the aeration tank: the first is the split flow type, the packing is installed on one side, and the other is aeration; the second is the direct type, the aeration device is directly installed under the biological rope packing, and the water and air are mixed.

    The installation spacing of split type is 100-150 mm, and that of direct type is 150-200 mm.

    Frequently Asked Questions

    How does the radial structure of the biological lace benefit wastewater treatment?
    The radial structure is composed of numerous circular fibers, which significantly increase the surface area. This design adapts to the growth and reproduction of various microorganisms, allowing the concentration of attached microorganisms to reach more than 150,000 mg/L.
    Can biological lace remove ammonia nitrogen from wastewater?
    Yes. On its surface, ammonia nitrogen is reduced by the proliferation of aerobic microorganisms. Inside the biological lace, biological denitrification is carried out by the proliferation of anaerobic microorganisms.
    What is the recommended installation spacing for biological rope packing?
    The vertical and horizontal spacing of the packing support should be 100-200 mm. For split-type installation, the spacing is 100-150 mm, and for direct-type installation, it is 150-200 mm.
    Do I need to cut the braided packing during installation?
    No, the braided packing does not need to be cut. It can be fixed directly onto the packing bracket using PE / PP ties, run 100-200 mm along the bracket, and fixed again.
    What are the two aeration tank installation methods?
    The first is the split flow type, where the packing is installed on one side and aeration is on the other. The second is the direct type, where the aeration device is installed directly under the biological rope packing to mix water and air.
    Is biological lace suitable for small-scale or high-concentration reaction tanks?
    Yes, because it can attach a large number of microorganisms, it is highly suitable for small-scale reaction tanks. It is also highly effective in high-concentration reaction tanks that are normally prone to clogging by other contact materials.