Leave Your Message

Lamella Clarifier: China Suppliers & Factory for Efficient Waste Water Treatment Solutions

The Lamella Clarifier Inclined Plate Settler (IPS) is an advanced solution for effectively removing particulates from liquids. As a preferred choice among suppliers in China, this innovative settler is often utilized in primary water treatment processes, replacing traditional settling tanks, Designed with inclined tubes and plates at a 60-degree angle, the IPS promotes efficient precipitation and purification of water. The sludge suspension layer, positioned above the inclined structure, allows suspended particles from raw water to accumulate on the bottom surface. Gravity aids in forming a thin mud layer, which slides back into the sludge suspension, collecting in the mud bucket. The treated sludge is then discharged into a sludge pool for further processing or beneficial reuse, Above this, the clean water gradually rises to the water collection pipe, where it can be either discharged directly or reused. This efficient method highlights the capabilities of our factory in China, ensuring high-quality performance for water treatment needs

    Features

    • Maximized sedimentation area within limited footprint.

    • High-rate clarifier for high SS water (grit, clay, lime & mental particles).

    • Circular sludge hopper with sludge scraper to reduce total transportation height.

    • Indoor or outdoor layout (environmental temperature should be over 0°C).

    • Apply to automatic & continuous operation.

    • Design life: Carbon steel material: >10 years; Stainless steel material: >20 years.

    Lamella-Clarifier-3h60

    Advantages

    Higher efficiency, smaller footprint

    Inclined plates extended to 1.5m, separation efficiency improved (higher 1.5 ~ 2.0 times) comparing with radial flow clarifier and vertical clarifier and save 80% of area.

    Excellent hydraulic conditions

    No hydraulic corner and vortex, better precipitation performance.

    Inclined plates Chokeless

    Plates are of angle 60 degrees, spacing between 80 ~ 100 mm, back-washing device used.

    Strong and durable

    Inclined plates are breakless, collapseless. Adopt 6mm hard PVC board or 8 mm high quality PP board as special separation plate, module embedded installation, high strength, easy disassembling and maintenance.

    Sludge discharge smoothly

    No dead angle, sludge pump is recommended.

    Frequently Asked Questions

    What is the design life of the Lamella Clarifier?

    The design life depends on the materials used. Carbon steel structures have a design life of over 10 years, while stainless steel models offer a design life of over 20 years.

    How does the system achieve a smaller footprint?

    By using inclined plates extended to 1.5m, the separation efficiency is improved by 1.5 to 2.0 times compared to radial flow and vertical clarifiers, saving up to 80% of the required installation area.

    Can the clarifier be installed outdoors?

    Yes, it supports both indoor and outdoor layouts. However, for outdoor installations, the environmental temperature must remain above 0°C to ensure proper operation.

    What materials are the inclined plates made of?

    The plates are made of either 6mm hard PVC board or 8mm high-quality PP board. They feature module-embedded installation for high strength, making them breakless, collapseless, and easy to maintain.

    How does the system prevent clogging within the plates?

    The inclined plates are designed at a 60-degree angle with spacing between 80 to 100 mm. Additionally, a back-washing device is integrated to keep the plates chokeless.

    Does the clarifier support automated operation?

    Yes, the system is designed to apply to both automatic and continuous operations, minimizing manual intervention and maximizing efficiency.