Lamella Clarifier for Waste Water Treatment - China Suppliers and Factory Direct Solutions
Features
- Maximized sedimentation area within limited footprint.
- High-rate clarifier for high SS water (grit, clay, lime & mental particles).
- Circular sludge hopper with sludge scraper to reduce total transportation height.
- Indoor or outdoor layout (environmental temperature should be over 0°C).
- Apply to automatic & continuous operation.
- Design life: Carbon steel material: >10 years; Stainless steel material: >20 years.
Advantages
Higher efficiency, smaller footprint
Inclined plates extended to 1.5m, separation efficiency improved (higher 1.5 ~ 2.0 times) comparing with radial flow clarifier and vertical clarifier and save 80% of area.
Excellent hydraulic conditions
No hydraulic corner and vortex, better precipitation performance.
Inclined plates Chokeless
Plates are of angle 60 degrees, spacing between 80 ~ 100 mm, back-washing device used.
Strong and durable
Inclined plates are breakless, collapseless. Adopt 6mm hard PVC board or 8 mm high quality PP board as special separation plate, module embedded installation, high strength, easy disassembling and maintenance.
Sludge discharge smoothly
No dead angle, sludge pump is recommended.
Frequently Asked Questions
What is the design life of the Lamella Clarifier?
The design life varies by material: over 10 years for carbon steel structures and over 20 years for stainless steel structures.
What are the environmental temperature requirements for installation?
The equipment can be set up in both indoor and outdoor layouts, provided the environmental temperature is kept above 0°C.
How does the inclined plate design save space?
By extending the inclined plates to 1.5m, the separation efficiency is improved by 1.5 to 2.0 times compared to radial and vertical flow clarifiers, saving up to 80% of the required footprint area.
What prevents the inclined plates from clogging?
The plates are designed at a 60-degree angle with a spacing of 80 to 100 mm and utilize a back-washing device to ensure a chokeless operation.
What materials are used for the inclined plates?
The plates are made of either 6mm hard PVC board or 8mm high-quality PP board, which are breakless and collapseless for high durability and strength.
How is sludge discharged from the system?
The system features a circular sludge hopper with a sludge scraper to reduce the transportation height and avoid dead angles. A sludge pump is recommended for smooth discharge.


